Injection moulding machines & turnkey lines
From machine to finished product, in one line.
Xiantai supplies two-platen injection moulding machines from 650 to 4,000 tons, plus complete turnkey lines for pallets, dustbins, cable ties, tubes, brushes, LED lighting and more.
Two-platen machines
650 to 4,000 tons clamping capacity
Multi-colour machines
180 to 2,100 tons
Servo energy saving
30–70% less power, depending on product
Complete production lines
Machine, mould, robot and auxiliaries
Turnkey solutions
Thirteen complete production lines, ready to run
Pallet injection solution
An automated line on 1,750 to 4,000 ton machines, from moulding to palletizing.
See pallet range 02Dustbin solution
Dedicated machines for trash cans, with a high-mixing screw for even colour and up to 10–20% higher productivity.
Get a proposal 03Nylon cable tie solution
Turnkey line for PA66 and PA6 cable ties in multi-cavity moulds, with testing and packaging included.
See tie sizes 04Soft tube solution
Tubes for toothpaste, cosmetics, cream, sunscreen, facial cleanser and glue, from extrusion to filling.
Get a proposal 05Brush making solution
Fully automatic brush-making and tufting machines with finishing equipment for complete brush production.
Get a proposal 06Artificial flower solution
Turnkey line with moulds for many types of artificial flowers, from moulding to conveying.
Get a proposal 07LED bulb production solution
Covers, lamp cups, lamp caps and assembly for A60–A95 and T50–T140 bulbs, semi-automatic or fully automatic.
Get a proposal 08LED tube lighting T5 / T8 solution
PC tube extrusion line with moulds, puller, setting table and loading and disconnection stations.
Get a proposal 09Cable clips & wall plug anchors solution
Building-trade fixings made with dedicated moulds and an automatic assembly line.
Get a proposal 10Junction box & electrical switch solution
Complete lines for PVC junction boxes and electrical switches and sockets, with moulds and an automatic assembly line.
Get a proposal 11Medical components solution
Medical injection moulding, moulds and automatic assembly machines for syringes, needles and infusion sets.
Get a proposal 12PE pipe fitting solution
Large injection machines and moulds for standardised PE elbows, tees and straight pipe fittings.
Get a proposal 13Paint bucket solution
Servo injection machines for 10 L to 33 L paint and chemical buckets and their lids.
Get a proposalTP series two-platen machines
Large parts, evenly clamped
Two-platen injection moulding machines from 650 to 4,000 tons, built for big and deep products such as pallets, bins and crates. A multi-colour range runs from 180 to 2,100 tons.
Four clamping cylinders
Even clamping force reduces product shrinkage and deformation.
Wide tie-bar spacing
A large space between the tie bars and a long opening stroke suit products that are big or deep.
Twin-cylinder injection
Parallel injection cylinders give stable, accurate shots.
Servo hydraulics
Saves 30–70% power compared with a traditional proportional pump, depending on the product.
Models
- TP-650B
- TP-850B
- TP-1050B
- TP-1450B
- TP-1450L
- TP-1750B
- TP-2200B
- TP-2750B
- TP-3500B
- TP-3500L
- TP-4000B
- TP-4000L
Processes
Euromap 12 and 67 robot interfaces, automatic mould-height adjustment, and network monitoring are available.
Request the TP catalogueSpotlight: pallet lines
28 four-way pallet specifications
An automated line on 1,750 to 4,000 ton machines, from moulding to palletizing. Seven-foot, nine-foot, three-, five- and six-runner, reversible and welded designs.
- Mould
- Dryer & loader system
- Robot
- Chiller
- Granulator
- 1010D-4way
- 1000 × 1000 × 140 mm · 9 foot
- 1208WT-4way
- 1200 × 800 × 150 mm · 5 runners
- 1210WS-4way
- 1200 × 1000 × 150 mm · reversible
- 1008CB-4way
- 1000 × 800 × 170 mm · 3 runners
- 114114-4way
- 1140 × 1140 × 170 mm
- 1411YS-4way
- 1400 × 1100 × 140 mm · reversible
Spotlight: cable tie lines
From 2.5 mm to 8 mm ties, up to 100 cavities
The turnkey line includes the injection moulding machine, moulds, robot, PA66 or PA6 material, a tension testing machine and a packaging machine. Ties from 2.5 mm to 8 mm wide are made in up to 100 cavities. Sample sizes shown; more specifications available.
Request the full size listAbout Xiantai
Built on engineering, backed by service
Xiantai supplies injection moulding machines and complete turnkey production lines to manufacturers worldwide, working with its sister companies in Ningbo, China.
Every project starts from your product: we match the machine, mould, robot and auxiliaries to the material and the output you need, and support the line after delivery.
Talk to our teamOne supplier, whole line
Machine, mould, robot and auxiliaries matched to your product.
Energy-saving drives
Servo hydraulics cut running cost without slowing the cycle.
Custom configuration
Screws, controllers and options chosen for your material and part.
Responsive support
Remote guidance and spare parts for machines in the field.
650–4,000 t
Two-platen machine range
180–2,100 t
Multi-colour machine range
30–70%
Power saved with servo system
13
Turnkey production solutions
Industries
Machines that fit your market
- Logistics & pallets
- Household & dustbins
- Electrical & cable management
- Personal-care packaging
- LED lighting
- Brushes & home décor
- Building & construction fixings
- Automotive & large moulded parts
- Medical & healthcare
- Pipes & fittings
- Industrial packaging
How it works
From inquiry to production in four steps
-
1
Send your requirement
Tell us the product, material and output you need.
-
2
Receive a proposal
We recommend the machine, line layout and quotation.
-
3
Build and test
Your machine and line are produced, run and inspected.
-
4
Ship and support
Export packing, delivery and ongoing service.
Contact
Tell us what you want to make
Send your product, material and target output. Our team replies with a recommended machine or production line and a quotation.